Description of the role Spiral washing machine

Detailed Product Description

Sign discs are ideal for scrubbing difficult material, Tough insoluble clays, conglomerates and soft stone, and aggregates

properties

Spiral Washing machine ideal for difficult materials such as tough insoluble laundry clays, conglomerates, soft stone and cemented total

High capacity

Heavy-duty conveyor paddles

Made with heavy duty tubs

Oversize bearings and gears

Thick waves

The lower end bolted to fully machined stub shaft. The upper end by means of flexible coupling is mounted to the output shaft of the transmission

The compound drive divides the operating load over an optimal combination of oversized helical and spur gears

Dauerschleifenund grinding wheel paddle protocol

Adjustable drainage ports on both sides of the lower end of the trough

descriptions

Our spiral washing machine are ideal for scrubbing difficult Shaking Table material. Tough insoluble clays, conglomerates and soft stone, and certain cemented aggregates are clean too difficult, properly in normal screw machines. The log washer thoroughly scouring, breaks, and cleans the toughest materials. This high quality, very durable machine and perform under the toughest conditions sound with minimum power, water and downtime.

Feed material is fed, usually two to four feet from the feed end of the box and is subjected to a resultant aggressive washing effect of the intermeshing paddle design. The paddles have two functions: they help convey material and are the catalyst to material on material scrubbing. The clean material works uphill, between the shafts, and is discharged to the bottom of the box. Added deleterious materials in water and carried out over a weir on each side of the box. The length of the disc field is removed depends on the proportion and tenacity of clay or the waste.

Outside filter drum permanent magnetic filter

Outside filtering drum permanent magnetic filter is in the ore - used processing, metallurgical industry, chemical plants, paper industry and etc, for dewatering flotation concentrates of non-ferrous metals ( such as copper, zinc, lead, nickel and etc, ) and concentrates of non - metal (for example, sulfur - phosphorus, talc, fluorite, coal and so on) and can also for separating into suspensoids that will be used soild liquid and not easy to set down.

Structure: This type of equipment is mainly the drum, trough, distribution head, mixer, and transfer device together.

Operation: In operation of the filter, the slurry is supplied into the tub. At this time, the sludge is suspended in the trough as a result of agitation of the mixer. When the plate rotates, due to the vacuum in the vacuum filter the sucked solids immersed in the slurry on the surface of this drum excircle containing slurry in the container. When the surface of the filter is exposed to the vacuum filter, the remainder forming conveyor and dewatering belt is always maintained. It sticks start is sucked dry at this time, materials. As the drum continues to rotate, filter residue is scraping band. Here, the negative pressure in the interior of the drum changes in air pressure. It blows down the filter residue and blowing holes through the filtration of the filter cloth. To remove the filter residue on the filter surface, as a kind of special scraper be installed. The surface of the filter is re-infused into the surface of the drum before the suspension again influenced in vacuo.

YA Circular vibrating screen and YK Circular vibrating screen

1. Use

YA Circular vibrating screen is mainly applied in coal, Gold Mining Machine, power generation, to classify building materials, water, light and chemical industries and other industries and a highly efficient screening machine for coal, ore, coke and other bulk materials.

2. Working philosophy and Structural Property

The screen is powered by an electric motor with eccentric mass about Delta belt drive, so that screen box to vibrate vibrator, circular with the path of movement of the screen field.

The Circular vibrating screen is a screen box, vibrator, damping spring device support and other sub-frame is as shown in Figure. The screen box uses the expanded ring groove rivet connection to and is of frame structure.

The vibrator takes eccentric shaft and eccentric block and the spring damping device with steel spiral spring.

Hydraulic grade box - Jiangxi Shicheng Mine Machinery Factory

Hydraulic grade box is a field made ​​of iron pyramid, there is the form drag loaded sandpaper on the head and with the Note field bottom valve below. Usually from 200 millimeters to 800 millimeters wide a range of class boxing connection with the ordinary water, sinking pellets of substances from thick to thin. He is widely regarded in the hydropower degree work before the table classification, the grade and the assignment plays amount of mineral deposits role to improve the classification efficiency of the table. Hydropower class box has merits as fellows: simple structure, for the maintenance of advantage, consume less power, reliable performance, and so on ease of operation.

　

Models\Item	YX-200	YX-300	YX-400	YX-600	YX-800
resisted the sand volume	11
resisted the sand length (mm)	180	280	380	590	790
of discharge diameter (mm)	25
increased pressure (kg/cm2)	1-2
to Size (mm)	2-3
ore concentration (%)	20-25
water (m/t)	2-3
dimension （L×W×H）(mm)	800×200 ×1000	800×300 ×1000	800×400 ×1000	800×600 ×1000	800×800 ×1000
Weight（kg）	0.107	0.124	0.148	0.178	0.214

Mini mobile gold washing machine description and Optional Parts

description

This Mini mobile gold washing machine is manufactured according to customer's requirement, The machine consists of hopper, washing drum, drum screen, chain driven system and exhaust funnel.

Optional Parts

1.Tyres

2.diesel engine / gas engine driven system.

3.sluice field

4.water spray

5.water pump

Available models:

JXSC-400, JXSC-500, JXSC-600, JXSC-750th or we can Gold Mine Equipment under your own design.

Gold Mining Machine - Sluice box mat

Sluice box mat description

Use sluice mat in the sluice box to catch the gold granules. It has been widely used in alluvial Gold Mining Machine, and sometimes it is used for alluvial tin or coltan recovery.

Our sluice mat made ​​by Japan technology, with a very good quality and also with an extremely high recovery effect than the traditional mat. Enter a high economic benefite for the user.

Types of sluice mat

There are three types of sluice mat: fine matt, meddium and rough mat.

Gold Scrubber washing machine usage and applications of its advantages

description.

The Gold scrubber washing machine is a machine washing and grading function.

application

The rotary scrubber is always in processing minerals such as ferrous metals including hematite and magnetite and nonferrous metals such as lead, zinc, gold and silver etc, especially for the washing of Gold Mine Equipment ore with sticky clay inside.

advantage

First This gold-diggers washing machine have a very strong ability crumbled sticky clay. Manganese-iron with many sharp shape is well mounted in the drum, in order to increase the ability of the decay of the sound.

Second This machine will get a high capacity 200 t / h could reach to meet other

3rd This machine is designed by our experienced engineer, with a very stable performance, and very easy to use.

4th There are many models, and also we can make this machine according to special requirement of the customer.

Trommel gold washing plant - Jiangxi Shicheng Mine Machinery Factory

Description:

This placer Gold Mining Plant flow Chat is developed by our experienced engineers, based on its installation and consulting experience for the gold mining companies in many countries. it is made ​​of perforated drum, centrifugal dressing machine ( Nelson centrifuge ), laundry chute, shaking table and conveyor belt.

Advantages: This plant design get many competitive advantages that our customers are extremely high returns.

First, large capacity. As high as 100 tons / hour, to give a crude oil processing capacity of 800 tons per day.

Secondly, low price. EXW price is about 56000 usd for the 50 ton / hour plant.

Third. Easy to install and operate, all devices in this system is complete machine that can be easily installed, and this machine is also very easy to set up and operate.

And our gold washing plant the most important, the effectiveness of this plant. you can easily find the precious gold in concentrate when you test the production.

The devices were used:

1. Trommel screen

2. Jig separator / centrifugal concentrator / sluice / vibrating table.

3. Belt conveyors.

wet mill machine

 

Description:

 

Wet Mill Machine is a traditional grinding mill machine, which was newly developed. The traditional wet mille was with the hard rock round plate for grinding, driven by cow or donkey. The modern wet mill machine is with the iron miller and electric motor.

 

application:

 

The wet mill machine has been widely used for Gold Mining Plant before , usually it is to the grinding of hard rock gold ore was used , and at the same time mixing the mercury to the concentration of gold. And this equipment uses a number of times to grind the small stone powder.

 

advantages:

 

The wet mill machine has many advantages , compare the ball mill machine :

 

1 Easy to install and operate : this machine is very simple, only the electric motor , gearbox, frame and iron miller.

 

2.Easy for maintenance and wear and

 

3.Low price and low operating costs

 

4.Small in size, easy to move and uninstall

Grinding steel ball

 

Detailed Product Description

 

Grinding steel ball:

1 High hardness;

2 Abrasion resistant;

3 Long life.

 

Grinding balls: 20 ~ 130mm

Chemical composition (%): C: 2.3 to 2.4, Si: 1.5max, Mn: 0.5-1.5, Cr: 1.0-3.0, P: 0.1 max, S: max 0.1

 

Grinding steel ball:

 

Applied areas: cement building materials, metal mining, Gold Mining Equipment, coal paste thermal power plants, chemical, ceramic coating, light industry, magnetic materials.

Specification

No.	Diameter (mm)	Weight of each (kg)	Pcs/ton
1	Ø20	0.0322	31056
2	Ø25	0.063	15873
3	Ø30	0.11	9091
4	Ø40	0.257	3891
5	Ø50	0.50	2000
6	Ø60	0.867	1153
7	Ø70	1.37	729
8	Ø80	2.05	487
9	Ø90	2.90	345
10	Ø100	4.00	250
11	Ø110	5.30	188
12	Ø120	6.80	147
13	Ø125	7.75	129
14	Ø130	8.74	114

 

The Product Description

Model	Mechanical properties		Microstructure
	HRC	Times of falling (3.5m)
Low Chromium	≥45	8000	P+C
Medium Chromium	≥50	8000	P+C
High Chromium	≥56	8000	M+C

 

Chemical Composition

Model	Chemical Composition
	C	Si	Mn	Cr	P	S
Low Chromium	2.3-3.4	≤1.5	0.5-1.5	1.0-2.0	≤0.1	≤0.1
Medium Chromium	2.2-2.8	0.5-1.0	0.5-0.8	10.0-12.0	≤0.1	≤0.1
High Chromium	2.4-3.2	0.5-0.8	0.5-0.8	16.0-18.0	≤0.1	≤0.1

Coarse jaw crusher

Coarse jaw crusher is widely used in Gold Mining Plant, metallurgical industry, building material, highway, railway, water and chemical industries. Different materials with compressive strength less than 350 MPa can be crushed.

Model	Inlet size	Feed size	Output size	Capacity	Power	Weight
	mm	mm	mm	m3/h	kw	t
PE150×250	150×250	130	30-100	3	7.5	1.5
PE250×400	250×400	210	40-100	7.5	18.5	3
PE400×600	400×600	340	40-100	34	30	7
PE500×750	500×750	425	50-100	52	55	15
PE600×900	600×900	500	65-160	75	55	21
PE750×1060	750×1060	630	80-140	130	110	33
PE900×1200	900×1200	750	95-165	164	110	55
PE1200×1500	1200×1500	1020	150-300	500	160	100.9
PEX100×600	100×600	80	15	9	7.5	5
Jaw crusher
PEX150×500	150×500	120	30	6	13	2.5
PEX150×750	150×750	120	18-48	16	15	3.5
PEX200×1000	200×1000	160	20-55	23.8	22	6.5
PEX250×750	250×750	210	25-60	22	22	4.9
PEX250×1000	250×1000	210	25-60	32	30	6.5
PEX250×1200	250×1200	210	25-60	38	37	7.7
PEX350×750	350×750	250	35-60	45	37	9.21
PEX300×1300	300×1300	250	20-90	65	75	11

Hammer crusher

1. Profile

Hammer crusher is one of the main types of equipment of crushing limestone , coal or brittle materials under medium hardness in industrial departments such as metallurgy , building materials - chemical, water and electricity . It has features , including large crushing ratio , high production capacity , uniform particle size crushed products etc.

Our company is now engaged in the design and production of hammer crusher Gold Mining Equipment for more than thirty years. Our products are made of advanced product structure , smooth operation and low energy consumption. Our company has a series of hammer crusher, which are also made by users at home and abroad.

2. Work Principle

Hammer crusher crush materials by the action . The crushing process is influenced by the rapidly rotating hammer When the materials get into the crusher, they disintegrate , the crumbled materials then gain kinetic energy from the hammer and running towards the baffle and grill bar at a high speed , at the same time the materials falling into each other and are collapsed for many times ; materials , which is narrower than the gap between the grate bars are out of the gap , while larger materials crumble after affects , sanded and re-extruded bar on the grate before being squeezed out of the gap through the hammer in order to obtain products of the required particle size.

Hammer crusher can be divided into reversible ones and not reversible . The rotors turn the hammer crushers are reversible. Such hammer crushers are usually used for fine crushing Used . The rotors of the non-reversible hammer crushers are not reversible. Such hammer crushers are typically used intermediate crushing .

3. main structure

Such hammer crusher mainly composed of frame , rotor, grate bar , beater plate , actuating device , etc.

Products case and art and technology rules number

model and size	speed	Feeding particle size	The grain-size	production	weight	power	Envelop dimensions
PC-400×300	1450	≤100	10	3-10	0.8	11	812×9827×85
PC-500×350	1250	≤100	15	5-15	1.2	18.5	1200×1114×1114
PC-600×400	1000	≤220	15	5-25	1.5	22	1055×1022×1122
PC-800×600	980	≤350	15	10-50	3.1	55	1360×1330×1020
PC-800×800	980	≤350	15	10-60	3.5	75	1440×1740×1101
PC-1000×800	1000	≤400	13	20-75	7.9	115	3514×2230×1515

Specifications \ parameters	Processing power (T/H)	Feeding particle size (mm)	Row partical (mm)	With power
				motor (KW)	Diesel engine (horse)
200×500	1-2	≤50	≥1.5	15-18	24
300×500	3-6	≤50	≥1.5	18-22	30
400×600	5-10	≤50	≥1.5	25-30	45

Led street light: Yunxi shaking table

Led street light: Yunxi shaking table: First The functions and applications of Yunxi Shaking Table . The total production of drawings Yunxi shaking table are based on the sta...

Yunxi shaking table

First The functions and applications of Yunxi Shaking Table. The total production of drawings Yunxi shaking table are based on the standard drawings of Yunnan Tin Industry company strictly based . This type of table is customized in various non-ferrous metal ores. It can be used to focus the treatment and concentration of the fine sizes of less than 2 mm iron metals. For many years practice prove that Yunxi shaking table is a reliable performance, high efficiency , low noise and convenient. It is popular with mine owners .

Second The basic structure of Yunxi Gold Shaking Table. It consists of bed, head and driving merchandise three parts. The support and implementation are made ​​the bed . Bed has coarse bed and carving groove bed. According feed ore sizes and ore density real bed type is selected ( forms attached ) . Bed connected by the hook on the bed head driving support products . With the push - bed - head , the bed moves back and forth. The bed head moves under the eccentric drive shaft of the eccentric roller rocker arm to make moving . How : The rocker arm drives connected to the screw bolt moves back and forth. The lubricant bearing is the ZQSN5 -5 - 5 material , the low noise and moves has been used properly . The driving commodity is used to adjust the slope of the table , hand wheel used to adjust the tilt rail so produces the bed slope .

3.       The technical parameters

Name	Specification	Technical Data
Bed Dimension	4436×1825×1536m/m	Bed Type	Stroke（m/m）	Stroke Per Minute （r/m）	Water Consumption（Mз /Set Day）	Process Capacity（T/Set Day）
Outline Dimension	5454×1825×1242m/m
Adjustable Stroke	8-22m/m	Coarse Sand Bed	16-22	240-290	190	30
Fitted Motor	JO2-31-61.5 kw	Fine Sand Bed	10-16	300-320	80	8
Weight	1012 kilo	Carved Groove Bed	10-16	330-340	50	8

   4.       Concentrating technical conditions of table

Bed Type	Concentrating Technical Conditions
	Feed Ore Size （m/m）	Feed Ore Density (%)	Feed Ore Volume (Mз /Set Day)	Water Consumption （Mз/Set Day）	The Minimum Slope
Coarse Sand Bed	2-0.2	20-25	130±	60	2°30″
Fine Sand Bed	0.5-0.037	15-20	50±	30	1°50″
Carved Groove Bed	0.074-0.019	15-20	30±	20	0°45″

Jiangxi Shicheng Mine Machinery Factory Hydrocyclone

Product description :

Metal mining is widely used in mining Hydrocyclone technology of choice in a variety of metal ore . It is mainly manifested in the following: 1. Classification Section closed mill

2 . For the second quarter closed-circuit grinding and classification

3 . For heavy grinding fineness classification

4 . Select the mud before and after the removal of choice

5. Dam and backfill gangue .

In the closed-circuit grinding system , it has a high classification efficiency and fine fineness overflow at high concentrations mine . Grading 5-10 % higher efficiency than ordinary spiral classifier . It is beneficial for improving the utilization factor grader .

According grinding capacity , fineness and sedimentation overflow concentrated cyclone select the appropriate norms and patterns. This is to obtain the optimum operating state of the premise. Tongge able to provide independent , parallel connection machine or machine series in such specifications for Φ50, Φ75, Φ100, Φ125, Φ150, Φ200, Φ250, Φ300, Φ350, Φ500 and Φ660.Fine sand, less than 37μm, in the choice of mine Gold Mining Plant gangue material can not be used as a weir . After the cyclone classification, coarse particles left in the bottom of the dam , the fine particles to move to the gangue tail. During exercise fine-grained hierarchical nature. Some full of clean water, which can be used to call back the water . Full tail filling process, we use a cyclone separator concentrate grade coarse particles , so to reduce the load on filter , to achieve the best results. Use cyclone to complete the dam grouting work in order to solve problems such as leaking mine , sink and discharge excessive water. Therefore, to achieve significant economic and social benefits .

Hydraulic Cyclone Spec and Technical Parameters

Specif ication	Canister Interior Diameter (mm)	Cone Angle (o)	Overfall Pipe Dia (mm)	Bottom Exit Dia (mm)	Max. Perm itted Fee ding Granu larity (mm)	Feeding Pressure (Mpa)	Processing Capacity (m3/h)	Classi fication Granu larity (um)	Overall Siz			Mach ine Weig ht (Kg)
									L (mm)	W(mm)	H(mm)
FX660	660	20	180~240	80~150	16	0.03-0.2	250~350	74-220	1250	890	2650	995
FX500	500	20	130~200	35~100	10	0.03~0.3	140~220	74~200	850	790	2050	495
		15						74~150	850	790	2380	540
FX350	350	20	80~120	30~70	6	0.04~0.3	60~100	50~150	775	605	1765	182
		15						50~120	775	605	2115	230
FX300	300	20	65~115	20~50	5	0.04~0.3	45~85	50~150	665	585	1310	108
		15						40~100	665	585	1505	169
FX250	250	20	60~100	16~45	3	0.06~0.35	40~60	40~100	540	480	1180	72
		15						40~100	540	480	1220	77
		10						30~100	540	480	1380	83
FX200	200	20	40~65	16~32	2	0.06~0.35	25~40	40~100	435	360	1050	60
		15						30~100	435	360	1115	64
		10						30~100	435	360	1205	69
FX150	150	20	30~45	8~22	1.5	0.06~0.35	11~20	30~74	280	295	690	20
		15						30~74	280	295	900	22
		8						30~74	280	295	1270	60
FX125	125	17	25~40	8~18	1	0.06~0.35	8~15	20~100	210	185	620	10
		8						20~74	250	240	985	12
FX100	100	20	20~40	8~18	1	0.06~0.35	5~12	20~100	260	210	525	8
		15						20~100	268	215	720	13
		8						20~100	268	215	1000	21
FX75	75	15	15~22	6~12	0.6	0.1~0.4	2~5	20~74	240	230	465	4.2
		6						5~40	240	230	800	7

Note: Design and manufacture according to customers’ requirements.

Bed Type	Concentrating Technical Conditions
	Feed Ore Size （m/m）	Feed Ore Density (%)	Feed Ore Volume (Mз /Set Day)	Water Consumption （Mз/Set Day）	The Minimum Slope
Coarse Sand Bed	2-0.2	20-25	130±	60	2°30″
Fine Sand Bed	0.5-0.037	15-20	50±	30	1°50″
Carved Groove Bed	0.074-0.019	15-20	30±	20	0°45″