Sand gold separating plant - Jiangxi Shicheng Mine Machinery Factory

This sand gold separating plant is built in Sudan. There are 2 lines in the site, each line is with capacity of 50tph. The equipments include trommel screen, centrifugal concentrator, sluice box and shaking table. The raw material is the sand gold, it’s without clay, so here the trommel screen is adviced. This plant is also with the water recycle system. Jiangxi Shichneg Mine Machinery Factory can provide you the design of the equipment, flowchart of the plant and also including the water recycle system. Our engineer can go to your site for the installation guidance.

Alluvial gold washing plant - Jiangxi Shicheng Mine Machinery Factory

placer gold trommel washer

This alluvial gold washing plant is built in Ghana in 2014. The capacity of this plant is for 50tph. The capacity can be customized, we can design the plant as per your requirement. This washing plant is with the equipment of high pressure washer, vibrating feeder, trommel scrubber, sluice box. Trommel scrubber is combined the function of washing clay and sieving size, it is mainly used for the raw material with sticky clay. The screen part in the trommel scrubber is made of PU material which is easy replaceable and wearing resistance.

Technical Parameters of Laboratory Cone Ball (Rod) Mill

Technical Parameters of Laboratory Cone Ball (Rod) Mill

XMQ series Cone ball mill is a laboratory. Crushing plants for wet fine grinding of ore (150 x 50 cone ball mill can also be used for dry grinding). It is used in laboratories for processing and fine grinding of artificial soap material and ores in applied metallurgy, building materials, chemicals, electricity, coal, water, electricity, agricultural and geological industry. The product is indicated by the only company of the former Ministry of Geology and Mineral Resources, manufactured in accordance with industry standards.

Laboratory Shaking Table General Drawing and Main Structure

This machine is mainly composed of table box, table top and table base.

First The Small shaking table box is hyperbolic link mechanism. When the eccentric shaft turns, it drives the upward and downward movement of the connecting rod. When said connecting rod moves downward, the toggle plate extends. The toggle plate on the right side is fixed to the supporting seat to the pull rod, while the pressure plate on the left side ( to move the seat, only up and down) on the adjustable supporting seat, which is installed along with the supporting seat supported by special screws. One end of the spring is covered on the supporting seat and the other end covered on the adjusting bolt plate over the fixed sleeve.

The pulley through the motor is driven to rotate. It drives the connecting rod downwardly and pushes the pressure plate to compress the spring, and urges the pull rod to the table surface to carry forward. When the connecting rod is moved upwards, it drives to move the tabletop to the rear under the effect of spring force. By doing it, the movement is continuous. The rotary motion is longitudinal straight

The stroke is obtained by the rotation of the particular stud. The whole mechanism is in the shell of the table box.

Second The working part of the vibrating table is a table surface of an aluminum alloy. Its appearance is an irregular quadrilateral.

Paint the outside of the table surface with ash and black spray paint for 3 to 4 times. The original rifle bar are replaced with dadoing. The dadoing arranged parallel to the direction of the Shaking Table. The dadoing near the feed end of the table surface is short. It will gradually as long as the lower part there. Your endpoints on the diagonal 50 mm from the discharge end of the table plate.

There are feeding box along the end of the table surface and adjacent to the corner on one side of the table. A water tank parallel to the feed box. Both are made ​​of organic glass and are used to add rinse water. The rinse water flows onto the table surface by rotation at the bottom of the tank mounted diamond rubber sole, and change the position of the angle of the rhombus rubber brake block. The water flow and its direction can be adjusted. Such feed box installed in the right corner of the table surface, so right casement Called.

3rd The mattress on the two cast iron carrier is installed. The beams are mounted on the bearings, and the bearing of the angle iron frame Attached.

There are tilt angle horizontally for the table top, which can be from 0 ° to 10 °. Adjust the horizontal bearings and wheel in the middle. At one end of the hand wheel shaft, which corresponds with the arcuate groove nut. Such mother corresponds to the fixed on the shaft connecting rods. When the hand wheel is rotated, the direction of the nut, it drives the rotation of the connecting rod, tie rod and the table surface.